Configuring Oac Settings For A User Role (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring OAC Settings for a User Role (NSM Procedure)

42
Table 7: User Role Access Configuration Details (continued)
Option Function
Enable Agentless Allows users to use
Access for this agentless access to
role access protected
resources.
Disable use of Disables use of AJAX
AJAX for for heartbeats.
heartbeats
Delegating Management Tasks to Infranet Controller Administrator Roles (NSM
Procedure) on page 55
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Creating and Configuring Infranet Controller Administrator Roles (NSM Procedure) on
page 48
Each time the user accesses a resource that is protected by the Infranet Controller, the
Odyssey Access Client configuration settings you specify will be used.
NOTE: Except for the login name in the profile, all of the other configuration
settings you specify on the Infranet Controller overwrite any existing settings
on the endpoint if Odyssey Access Client is already installed when the user
accesses the Infranet Controller.
To configure odyssey settings:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure the user-role access option.
Click the Configuration tab. In the configuration tree, select Users > User Roles.
3.
Add or open a user role and click the Agent tab.
4.
Click the odyssey–settings button and configure the settings as specified in Table 8
5.
on page 43.
Your Action
Select this option to allow access to endpoints in
addition to using Odyssey Access Client on Windows
machines. If you don't select the agentless option,
the Infranet Controller allows access to protected
resources by means of Odyssey Access Client only.
NOTE: To configure agentless access, you must
also configure a permit infranet auth policy on the
Infranet Enforcer to allow access for agentless
endpoint platforms. For configuration instructions,
see "Configuring Infranet Controller Source IP
Access Restrictions (NSM Procedure)".
Select this option to disable use of AJAX for
heartbeats.
Copyright © 2010, Juniper Networks, Inc.