Configuring An Infranet Controller Nis Server Instance (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation

Configuring an Infranet Controller NIS Server Instance (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 42: Local Authentication Server Instance Configuration
Details (continued)
Option Function
Realm name Specifies the authentication realm
that the user administrator maps to
when signing in to the Infranet
Controller.
Server Catalog > Expressions tab
name Specifies the name of the
expression.
value Specifies the value(s) of the
expression.
Configuring an Infranet Controller LDAP Server Instance (NSM Procedure) on page 125
Configuring an Infranet Controller RADIUS Server Instance (NSM Procedure) on page 134
Configuring an Infranet Controller RSA ACE/Server Instance (NSM Procedure) on
page 119
When authenticating users with a UNIX/NIS server, the Infranet Controller verifies that
the username and password entered through the sign-in page corresponds to a valid
user ID and password pair in the NIS server.
To configure an NIS server instance:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure an NIS server instance.
Click the Configuration tab. In the configuration tree, select Authentication > Auth
3.
Servers.
Add or modify NIS server settings as specified in Table 43 on page 133.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 43: Infranet Controller NIS Server Instance Configuration Details
Option
Auth Server Name
Chapter 13: Configuring Authentication Servers
Function
Specifies a name for the
auth server.
Your Action
Select the authentication realm.
Enter a name for the expression.
Enter a value for the expression.
Your Action
Enter a name for the auth server.
133