Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 54

NSM Infranet Controller Configuration Guide
36
Table 6: User Role Configuration Details
Option Function
General > Overview tab
Name Specifies a unique name for the user
role.
Description Describes the user role.
Session Options Specifies the maximum session
length, roaming capabilities, and
session persistence.
UI Options Specifies customized settings for the
Infranet Controller welcome page for
Odyssey Access Client users mapped
to this role.
Odyssey Specifies the Odyssey Access Client
Settings for IC settings for Infranet Controller access.
Access
Odyssey Specifies the Odyssey Access Client
Settings for settings for the preconfigured installer.
Preconfigured
Installer
General > Restrictions tab
Source IP Specifies source IP restrictions.
Restrictions
Browser Specifies browser restrictions.
Restrictions
Certificate Specifies certificate restrictions.
Restrictions
Host Checker Specifies Host Checker restrictions.
Restrictions
General > Session Options tab
Your Action
Enter a name.
Enter a brief description for the user
role.
Select General > Session Options to
apply the settings to the role.
Select General > UI Options to apply
the settings to the role.
Select this option to apply the
Odyssey Access Client initial
configuration settings.
Select this option to apply the
Odyssey Access Client settings for
the preconfigured installer.
See "Configuring Infranet Controller
Source IP Access Restrictions (NSM
Procedure)."
See "Configuring Infranet Controller
Browser Access Restrictions (NSM
Procedure)."
See "Configuring Infranet Controller
Certificate Access Restrictions (NSM
Procedure)."
See "Configuring Infranet Controller
Host Checker Access Restrictions
(NSM Procedure)."
Copyright © 2010, Juniper Networks, Inc.