Configuring Authentication Realms; Creating An Authentication Realm (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 9

Configuring Authentication Realms

Creating an Authentication Realm (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Creating an Authentication Realm (NSM Procedure) on page 87
Configuring Role Mapping Rules (NSM Procedure) on page 90
Configuring Infranet Controller Authentication Policies (NSM Procedure) on page 92
To create an authentication realm:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to create an authentication realm.
Click the Configuration tab. In the configuration tree, select Administrators > Admin
3.
Realms or Users > User Realms.
Add or modify settings on the General tab as specified in Table 25 on page 87.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 25: Authentication Realms Configuration Details
Option Function
Realm Name Specifies a unique name for
the authentication realm.
Description Describes the
authentication realm.
When editing, start Specifies whether the Role
on the Role Mapping tab should be
Mapping page selected when you open the
realm for editing.
Your Action
Enter the name.
Enter a brief description for the
authentication protocol.
Select this option to start editing on the Role
Mapping page.
87