Creating A Radius Client - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Creating a RADIUS Client

Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Configuring the Infranet Controller RADIUS Server and Layer 2 Access
Table 21: RADIUS Vendors Configuration Details
Option
Name
Description
Dictionary
To create a RADIUS client:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to create a RADIUS client.
Click the Configuration tab. In the configuration tree, select UAC > Network Access
3.
> RADIUS Clients.
Add or modify RADIUS clients on the RADIUS Clients tab as specified in Table 22 on
4.
page 79.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 22: RADIUS Clients Configuration Details
Option Function
Name Specifies the RADIUS client's name.
Description Describes the RADIUS clients.
IP Address Specifies the IP address of the network
access device.
IP Address Specifies the number of IP addresses in
Range the IP address range for the network
access devices, starting with the address
specified for IP address.
Function
Specifies a name for the
RADIUS vendor.
Describes the RADIUS vendors.
Specifies the dictionary to be
associated with the RADIUS
vendor.
Your Action
Enter a name for the RADIUS
clients.
Enter a brief description for the
RADIUS clients.
Enter the IP address.
Enter the IP address range.
You can specify a range up to a
maximum of 32,768 addresses.
Your Action
Enter a name for the RADIUS
vendor.
Enter a brief description for the
RADIUS vendor.
Select the dictionary.
79