Deprecated Operating System; Limitations; Important Ssl Vpn And Infranet Controller Instructions; Nsm Server - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note

Table of Contents

Advertisement

Network and Security Manager 2010.3 Release Notes

Deprecated Operating System

Limitations

Important SSL VPN and Infranet Controller Instructions

NSM Server

4
NSM 2010.3 supports:
3000 low-end devices with 10 user connections
300 high-end devices with 25 user connections
NSM no longer supports ScreenOS version 4.X. You must upgrade your devices to
ScreenOS version 5.0 or later. NSM no longer supports Junos OS Release 9.2 or lower.
The following items are known limitations in this version of NSM:
NSM does not support Junos OS downgrades. However, if you need to downgrade a
device, follow these steps:
From the device, use the CLI command to downgrade the image. For example:
1.
root> request system software add <package-name> reboot
After the downgrade, from NSM, delete the device and then add it again.
2.
For Junos OS J Series and EX Series devices—NSM Configuration Editor cannot
completely validate the configuration that an NSM user has created before sending it
to the device. The device validates the configuration when the configuration is pushed
to the device as part of the Update Device job and may return validation errors to NSM.
For SSL VPN SA and Infranet Controllers—Secure Virtual Workspace (SVW) settings
on the SA device cannot be managed with NSM.
For EX Series switches—EX Series switches running Junos OS do not support snapshots.
Therefore, users should not select the "Backup the current filesystem(s) on the device"
check box in the final page of the Install Device Software wizard.
This section contains setup instructions and template usage guidelines for SSL VPN SA
(SA) and Infranet Controller (IC) devices.
There is no limit to the number of devices that can be simultaneously updated in NSM,
provided the configuration size on each device being updated is less than 5 MB. NSM
can execute updates in parallel across a maximum of eight devices while the remaining
update jobs are queued up.
If the software version of SA/IC configurations exceeds 5 MB, we recommend a
maximum of four devices per job for an appropriately sized Linux or Solaris server
running NSM.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Network and security manager

Table of Contents