Configuring Infranet Controller General Host Checker Options; Procedure); Configuring Infranet Controller General Host Checker Options (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation

Configuring Infranet Controller General Host Checker Options (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
contact the system administrator. The Infranet Controller does not assign the user
a role that allows access to protected resources.
After the user signs in:
(Odyssey Access Client only) During a session, if a user's computer becomes
noncompliant with the requirements of a Host Checker policy, a pop-up message
appears briefly in the system tray that informs the user of the noncompliance. The
user can display the remediation page by right-clicking the Odyssey Access Client
icon in the system tray, choosing Odyssey Access Client Manager from the context
menu, and then clicking the How do I resolve this problem link in the status section
of the Odyssey Access Client window.
(Agentless—Windows, Macintosh, Linux and Solaris) During a session, if a user's
agentless computer becomes noncompliant with the requirements of a Host Checker
policy, the Infranet Controller displays the remediation page to inform the user of
the noncompliance. On Windows agentless computers, Host Checker displays a
bubble and tray icon if the endpoint becomes noncompliant. The user must click the
bubble or tray icon to open a browser window that contains the remediation
instructions. On Macintosh, Linux, or Solaris agentless computers, Host Checker
automatically opens a browser window that contains the remediation instructions
as soon as the endpoint is noncompliant.
Creating Infranet Controller Global Host Checker Policies Overview on page 155
Executing Host Checker Policies on page 170
Configuring New Client-Side Policies (NSM Procedure) on page 157
Enabling Customized Server-Side Policies (NSM Procedure) on page 168
Implementing Infranet Controller Host Checker Policies (NSM Procedure) on page 172
You can configure global options for Host Checker that apply to any user for whom Host
Checker is required in an authentication policy or a role mapping rule.
To configure general Host Checker options:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure general Host Checker options.
Click the Configuration tab. In the configuration tree, select Authentication > Endpoint
3.
Security > Host Checker > Settings tab.
Add or modify Host Checker settings as specified in Table 54 on page 176.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 15: Configuring Host Checker Policies
175