Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 178

NSM Infranet Controller Configuration Guide
Related
Documentation
160
Table 50: Virus Signatures and Patch Management Info Configuration
Details (continued)
Option
Patch Management Info monitoring
Patch Management data
last updated
Auto-update Patch
Management data
Download Path
Download Interval
Portal Username
Portal Password
Use Proxy Server
Address
Port
Proxy Username
Proxy Password
Manually import patch
management data
Specifying Customized Requirements Using Custom Rules (NSM Procedure) on page 161
Configuring New Client-Side Policies (NSM Procedure) on page 157
Function Your Action
Specifies when the patch Displays the date on which the patch
management data was management data was last updated.
last updated.
Patch management data Select this option to automatically
is automatically updated. update the patch management data.
Specifies the URL of the The default url of the Juniper Networks
staging sites. staging site is displayed.
Specifies how often you Select the interval.
want the Infranet
Controller to automatically
import the current lists.
Specifies the Juniper Enter the Juniper Networks portal
Networks portal username.
username.
Specifies the Juniper Enter the Juniper Networks portal
Networks portal password. password.
Specifies that proxy server Select this option.
is used.
Specifies the IP address of Enter the IP address.
the proxy server.
Specifies the port that the Enter the port.
Juniper Networks support
site will use to
communicate with your
proxy server.
Specifies the username of Enter the username.
the proxy server.
Specifies the password of Enter the password.
the proxy server.
Specifies that the patch Select from the drop-down list or click
management list is the (+) button to browse and select
manually imported. the list.
Copyright © 2010, Juniper Networks, Inc.