Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 39

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
For a just-imported device, the configuration summary report displays the device
configuration that matches the configuration currently running on the physical device.
Delta Configuration Summary
A delta configuration summary shows you the differences between the configuration
you see in the NSM UI and the configuration on the physical device. To get a delta
configuration summary in NSM, from the Devices menu click Configuration and select
Get Summarize Delta Config. The Get Delta Config Summary dialog box appears with
a list of devices to which you have access. Select the device you just imported and click
OK. NSM queries the physical device to obtain a list of all CLI commands or XML messages
used in the device configuration, compares that list with the UI device configuration, and
generates a summary report of all differences, or deltas, discovered.
Get Running Configuration
A running configuration summary shows you the exact CLI commands or XML messages
that were used to create the current device configuration on the physical device. To get
the running config summary in the NSM application, from the Devices menu click
Configuration and select Get Running Config. The Get Running Config dialog box appears.
You see a list of devices to which you have access. Select the device you just imported
and click OK.
NSM queries the physical device to obtain a list of all CLI commands used in the device
configuration and generates a summary report that lists those commands. For a
just-imported device, the get running config summary report displays the device
configuration currently running on the physical device.
Importing an Infranet Controller Device Through Not Reachable Workflow on page 11
Importing an Infranet Controller Through Reachable Workflow on page 15
Chapter 3: Adding Infranet Controllers
21