Configuring Administrator Access Logs (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Administrator Access Logs (NSM Procedure)

214
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 60: User Access Logs Configuration Details
Option
Settings
Max Log Size
Login/Logout
User Settings
Enforcer Deny Messages
Syslog Servers
Server name/IP
Facility
Filter
Configuring Administrator Access Logs (NSM Procedure) on page 214
Configuring Client-Side Logs (NSM Procedure) on page 216
Configuring the Infranet Controller as an SNMP Agent (NSM Procedure) on page 216
Configuring Event Logs (NSM Procedure) on page 212
The administrator access log file contains administration information, including
administrator changes to user, system, and network settings, such as changes to session
timeouts and machine and server information. It also creates a log entry whenever an
administrator signs in, signs out, or changes licenses on the appliance.
Function Your Action
Specifies the maximum Enter the maximum log file size.
file size for the local log
file. The limit is 500 MB.
Logs the user login and Select this option to log login and
logout information. logout information.
Logs the user settings. Select this option to log user setting
information.
Logs the enforcer deny Select this option to log enforcer deny
messages. messages.
Specifies the name or IP Enter the server name or the IP
address of the syslog address.
server.
Specifies the facility for Select the facility.
the server. The Infranet
Controller provides eight
facilities
(LOCAL0-LOCAL7) that
you can map to facilities
on your syslog server.
Specifies the filter that you Select the filter.
want to apply to the log
file.
Copyright © 2010, Juniper Networks, Inc.