Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 65

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 8: OAC Configuration Details (continued)
Option Function
Encryption Specifies the encryption
method method you want Odyssey
Access Client to use. The
available choices depend
on the association mode
you selected.
Preconfigured Installer tab
Current Specifies the name of the
Preconfiguration zip containing the
file preconfigured installer file.
Preconfiguration Specifies the location
file containing the
preconfigured installer file.
Creating and Configuring Infranet Controller Administrator Roles (NSM Procedure) on
page 48
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Configuring Access Options on an Infranet Controller User Role (NSM Procedure) on
page 40
Delegating Management Tasks to Infranet Controller Administrator Roles (NSM
Procedure) on page 55
Chapter 6: Configuring User Roles and Administrator Roles
Your Action
Select the encryption mode:
none—Uses 802.1X authentication without
WEP keys. This option is available only if you
configure access point association in open
mode. This is a typical setting to use for
wireless hotspots.
WEP—Uses WEP keys for data encryption.
You can select this option if you selected open
mode association. Select WEP encryption if
the access points in your network require WEP
encryption. Odyssey Access Client
automatically generates the WEP keys.
AES—Uses the advanced encryption standard
protocol. Select AES if the access points in
your network require WPA or WPA2
association and are configured for AES data
encryption.
TKIP—Uses the temporal key integrity
protocol. Select TKIP if the access points in
your network require WPA or WPA2
association and are configured for TKIP data
encryption.
NOTE: If you select WEP encryption, the Infranet
Controller automatically selects the Keys will
be generated automatically for data privacy
option in the Odyssey Access Client Network
properties for the wireless adapter on Odyssey
Access Client.
Enter the filename.
Browse to locate the preconfigured installer file.
47