Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 61

Copyright © 2010, Juniper Networks, Inc.
There are two tabs under Odyssey Settings. The first tab, IC Access, allows you to
configure authentication and connection settings for the Odyssey Access Client. The
second tab, Preconfigured Installer, provides an interface that allows you to upload
a preconfigured version of Odyssey Access Client that you can deploy to users when
they access a role.
Click one:
6.
OK — Saves the changes.
Cancel — Cancels the modifications.
Table 8: OAC Configuration Details
Option Function
IC Access tab
Name of Profile Displays the hostname or
and Infranet the Infranet Controller
Controller URL.
Profile name Specifies the profile name.
The field is enabled only if
the Use this name option
is selected in Name of
Profile and Infranet
Controller box.
Require Requires Odyssey Access
connection to Client to always attempt
this Infranet to connect to this Infranet
Controller Controller and prevents
the user from
disconnecting from this
Infranet Controller. The
user also cannot delete
the properties of this
Infranet Controller from
the Odyssey Access Client
configuration.
Chapter 6: Configuring User Roles and Administrator Roles
Your Action
Select the profile name.
Use Infranet Controller's host
name—Specifies the name of the profile and
the Infranet Controller instance in Odyssey
Access Client. If the Infranet Controller does
not have a hostname configured, the URL for
the Infranet Controller or the redirect URL
from a captive portal is used instead.
Use this name:—Specifies the name of the
profile and the Infranet Controller instance in
Odyssey Access Client.
Enter the name for the profile and the Infranet
Controller instance in Odyssey Access Client.
Select this option to require connection to the
Infranet Controller.
43