Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 134

NSM Infranet Controller Configuration Guide
Related
Documentation
116
Table 36: Replica IF–MAP Server Configuration Details (continued)
Option Function
Authentication Specifies the authentication
Type type.
Configuring IF-MAP Session Export Policy on the Infranet Controller (NSM Procedure)
on page 109
Configuring IF-MAP Session Import Policy on the Infranet Controller (NSM Procedure)
on page 112
Configuring IF-MAP Server Settings on the Infranet Controller (NSM Procedure) on
page 107
Configuring IF-MAP Client Settings on the Infranet Controller (NSM Procedure) on
page 108
Your Action
Select the authentication method:
Basic—If you select Basic, enter a username
and password.
Certificate—If you select Certificate, select
the certificate authority that issued the IF-MAP
replica's certificate. Enter any restrictions, one
per line. If any restrictions match, for example
CN=ic.example.com, the certificate is
accepted.
Copyright © 2010, Juniper Networks, Inc.