Promoting An Infranet Controller Configuration To A Template; Template - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Promoting an Infranet Controller Configuration to a Template

Related
Documentation
Reverting an Infranet Controller Configuration to Default Values of a Template
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
NSM allows you to import an Infranet Controller configuration and then convert, or
promote, it to a template. You can then use that template to make identical configurations
on other Infranet Controllers.
To promote an Infranet Controller configuration to a template:
From the Devices workspace in NSM, double-click the Infranet Controller whose
1.
configuration settings you want to promote to a template. The Infranet Controller
Device dialog box appears.
Select the Configuration tab. The Device configuration tree appears.
2.
From the Device configuration tree, select the configuration node that you want to
3.
promote to a template, and select Promote Template. The Select templates dialog
box appears.
Select the template to which you want to apply the configuration settings and click
4.
OK. The Infranet Controller configuration is promoted to the selected template.
Creating and Applying an Infranet Controller Template on page 29
Adding an Infranet Controller Cluster with Imported Cluster Members on page 24
NSM allows you to revert the device configuration values to that of the template default
values. The default value is inherited from the template based on the order of priority in
which the templates are applied to the device.
To revert an Infranet Controller configuration to the default values in a template:
From the Devices workspace in NSM, double-click the Infranet Controller whose
1.
configuration settings you want to revert. The Infranet Controller Device dialog box
appears.
Select the Configuration tab. The Device configuration tree appears.
2.
From the Device configuration tree, right-click the configuration node that you want
3.
to revert and select Revert to template/default value.
Click OK. The Infranet Controller configuration reverts to the template default values.
4.
Creating and Applying an Infranet Controller Template on page 29
Promoting an Infranet Controller Configuration to a Template on page 31
Chapter 5: Using Templates
31