Configuring User Sign-In Policies - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Configuring User Sign-in Policies

Copyright © 2010, Juniper Networks, Inc.
Table 47: Administrator Sign–in Policies Configuration Details (continued)
Option
Realm Select
To define user sign-in policies:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to define the user sign-in policies.
Click the Configuration tab. In the configuration tree, select Authentication > Signing
3.
In > Sign-in Policies > User/Administrator URLs.
Add or modify the settings for the User/Administrator URLs as specified in Table 48
4.
on page 152.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Function
Specifies which realm(s)
map to the policy, and how
users and administrators
should pick from among
realms.
Chapter 14: Configuring Sign-In Policies
Your Action
Select User types the realm name
for the Infranet Controller to map
the sign-in policy to all
authentication realms, but do not
provide a list of realms from which
the administrator can choose.
Instead, the administrator must
manually enter the realm name into
the sign-in page.
Select User picks from a list of
authentication realms for the
Infranet Controller to map only the
sign-in policy to the authentication
realms that you choose. The
Infranet Controller presents this list
of realms when the administrator
signs-in to the Infranet Controller
and allows a realm to be chosen
from the list.
NOTE: The Infranet Controller does
not display a drop-down list of
authentication realms if the URL is
only mapped to one realm. Instead,
only the realm you specify is displayed.
151