Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 207

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Cancel—Cancels the modifications.
Table 55: System Maintenance Options Configuration Details
Option Function
Enable Allows you to more effectively manage
automatic Odyssey Access Client endpoints and roll out
upgrade of UAC features at your discretion.
Agents
By default, the Infranet Controller
automatically upgrades UAC agents of users
who connected if the agent is not current.
Automatic Keeps your system current and secure by
Version having the Infranet Controller notify you
Monitoring about critical software patches and updates.
To do this, it reports to Juniper Networks the
following data: your company name, an MD5
hash of your license settings, and information
describing the current software version.
Enable gzip Reduces download speeds when using HTTP
compression compression-enabled browsers.
Enable Kernel Enables the kernel watchdog that
Watchdog automatically restarts the system under
kernel lock down or when the kernel runs low
on some key resource.
CAUTION: Changing this setting will reboot
the system.
Enable File Enables the system to automatically clean
System up the file system when disk utilization
Auto-clean reaches 90%.
Feature
CAUTION: When enabled, this feature might
result in loss of data that might be relevant
in debugging system problems that occurred
a week ago or earlier. (That is, old debug logs,
core files, and snapshots might be removed.)
End-user Enables the language version for the Odyssey
localization Access Client end user.
Infranet Controller Services and Device Configurations Supported in NSM on page 5
Chapter 17: Using System Management Features in an Infranet Controller
Your Action
Select this option to disable
automatic upgrade of the UAC
agent.
Select this option to
automatically receive
notifications of critical
software patches and updates.
Select this option to reduce
the amount of data sent to
browsers that support HTTP
compression.
Select this option to allow the
Infranet Controller to
automatically shut down in the
event of an issue with the
kernel.
Select this option to allow the
system to automatically clean
up the file system when disk
utilization reaches 90%.
Select the language version for
the Odyssey Access Client end
user or accept the default.
189