Configuring Sensor Event Policies (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Sensor Event Policies (NSM Procedure)

196
OK—Saves the changes.
Cancel—Cancels the modifications.
Configuring ISG-IDP as a Sensor on the Infranet Controller (NSM Procedure) on page 193
Configuring Sensor Event Policies (NSM Procedure) on page 196
You can specify one or more rules that specify the actions the Infranet Controller takes
when it receives attack alert messages from an IDP device.
To create an IDP rule:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to specify sensor event policies.
Click the Configuration tab. In the configuration tree, select System > Configuration
3.
> Sensors > Sensor Event Policies.
Add or modify settings as specified in Table 57 on page 196.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 57: Sensor Event Policies Configuration Details
Option Function
Name Specifies a unique name
for the event.
Event Specifies an existing
event.
Event Determines the number
Count of times an event must
occur before action is
taken.
Your Action
Enter a name for the event.
Select an existing event.
Enter a number between 1 and 256.
Copyright © 2010, Juniper Networks, Inc.