Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 156

NSM Infranet Controller Configuration Guide
138
Table 45: Infranet Controller eTrust SiteMinder Configuration Details
Option
Auth Server Name
Auth Server Type
Siteminder Settings > Basic Settings tab
Policy Server
Backup Server(s)
Failover Mode?
Agent Name
Secret
Compatible with
On logout, redirect to
Function Your Action
Specifies a name for the Enter a name for the auth server.
auth server.
Specifies the auth server Select Siteminder Server.
type.
Specifies the name or IP Enter a name or IP address.
address of the SiteMinder
policy server.
Specifies a list of backup Enter a comma-delimited list of
policy servers (optional). backup policy servers (optional).
Specifies that the Infranet
Controller can use the
main policy server unless
it fails.
Specifies the SiteMinder Enter an agent name.
agent name.
NOTE: Shared secret and agent name
are case-sensitive.
Specifies the shared Enter a shared secret name.
secret.
NOTE: Shared secret and agent name
are case-sensitive.
Specifies a SiteMinder Select the server version from the
server version. Version 5.5 drop-down list.
supports versions 5.5 and
6.0. Version 6.0 supports
only version 6.0 of the
SiteMinder server API. The
default value is 5.5 policy
servers.
Specifies a URL to which Enter a URL.
users are redirected when
they sign out of the
Infranet Controller
(optional). If you leave this
box empty, users see the
default Infranet Controller
sign-in page.
Select Yes — Infranet Controller
uses the main policy server unless
it fails.
Select No— Infranet Controller load
balances among all the specified
policy servers.
Copyright © 2010, Juniper Networks, Inc.