Procedure); (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation
Configuring an Infranet Controller Active Directory or NT Domain Server Instance (NSM

Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 38: ACE Server Instance Configuration Details (continued)
Option
value
Configuring an Infranet Controller Active Directory or NT Domain Server Instance (NSM
Procedure) on page 121
Configuring an Infranet Controller Certificate Server Instance (NSM Procedure) on
page 124
The Infranet Controller supports Windows NT authentication and Active Directory using
NTLM or Kerberos authentication. When authenticating users with an NT Primary Domain
Controller (PDC) or Active Directory, users sign into the Infranet Controller using the same
username and password they use to access their Windows desktops.
To configure an Active Directory or Windows NT domain server instance:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure an Active Directory or NT domain server instance.
Click the Configuration tab. In the configuration tree, select Authentication > Auth
3.
Servers.
Add or modify an Active Directory or NT domain server instance as specified in Table
4.
39 on page 121.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 39: Active Directory or NT Domain Instance Configuration Details
Option
Auth Server Name
Auth Server Type
AD/NT Settings > General tab
Chapter 13: Configuring Authentication Servers
Function
Specifies a value for the
user expression in the
ACE/Server user directory.
Function Your Action
Specifies a name for the Enter a name for the auth server.
auth server.
Specifies the auth server Select AD/NT Server.
type.
Your Action
Enter a value for the user expression.
121