Installing And Configuring The Infranet Controller Device; Adding The Infranet Controller Device Through Nsm - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide

Installing and Configuring the Infranet Controller Device

Adding the Infranet Controller Device Through NSM

12
Before you can add the Infranet Controller to NSM, you must install and configure the
Infranet Controller device to have logon credentials for an NSM administrator.
To install and configure the Infranet Controller:
Select System > Network > Overview on the device's admin console and ensure that
1.
basic connection information such as the following are configured on the Infranet
Controller.
Network interface settings
DNS settings
Password
Select Authentication > Auth Servers and enter the username and password of the
2.
NSM administrator in the applicable authentication server.
NOTE: Only password-based authentication servers can be used. One-time
password authentication is not supported.
Select Administrators > Admin Roles and create a DMI agent role.
3.
Select Administrators > Admin Realms and create a DMI agent administrator realm
4.
for the DMI agent on the device and use role mapping to associate the DMI agent role
and realm.
NOTE: Ensure that the Host Checker, browser, and certificate restrictions
are not applied for the DMI agent role or realms.
For complete details on installing and configuring Infranet Controller devices, see the
Juniper Networks Unified Access Control Administration Guide.
To add the Infranet Controller device through the NSM UI:
From the left pane of the NSM UI, click Configure.
1.
Expand Device Manager and select Devices. The Devices workspace appears on the
2.
right side of the screen.
Click the Device Tree tab, click the New button, and select Device. The New-Device
3.
dialog box appears.
Select Device is Not Reachable and click Next.
4.
Enter the device name, and select the required color, OS name (IC), platform, and
5.
managed OS version from the drop-down lists.
Copyright © 2010, Juniper Networks, Inc.