Configuring The Number Of Concurrent Sessions And Concurrent Users For Infranet Controller Users (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation
Configuring the Number of Concurrent Sessions and Concurrent Users for Infranet
Controller Users (NSM Procedure)
70
To add a RADIUS request attribute policy to a realm:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure RADIUS request attribute restrictions for user realms.
From the Configuration tab, select Users > User Realms >Select Realm >
3.
Authentication Policies > RADIUS Request Attributes Policies to configure RADIUS
request attribute restrictions for user realms.
Select the RADIUS request attribute policies, which the endpoint must meet, from
4.
the Non-members area and click Add to move it to the Members area.
Select Allow access to realm if any ONE of the selected policies are passed.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Configuring RADIUS Request Attributes Policies (NSM Procedure) on page 83
Configuring Infranet Controller Source IP Access Restrictions (NSM Procedure) on
page 61
Configuring Infranet Controller Browser Access Restrictions (NSM Procedure) on
page 63
Configuring Infranet Controller Password Access Restrictions (NSM Procedure) on
page 66
Configuring Infranet Controller Host Checker Access Restrictions (NSM Procedure) on
page 67
Configuring the Number of Concurrent Sessions and Concurrent Users for Infranet
Controller Users (NSM Procedure) on page 70
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Creating and Configuring Infranet Controller Administrator Roles (NSM Procedure) on
page 48
You can limit the number of concurrent sessions and concurrent users for Infranet
Controller users. A user who enters a URL to one of this realm's sign-in pages must meet
any access management and concurrent user requirements specified for the
authentication policy before the Infranet Controller presents the sign-in page to the user.
Copyright © 2010, Juniper Networks, Inc.