About This Guide; Objectives; Audience; Conventions - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

About this Guide

Objectives

Audience

Conventions

Copyright © 2010, Juniper Networks, Inc.
Objectives on page xiii
Audience on page xiii
Conventions on page xiii
List of Technical Publications on page xv
Requesting Technical Support on page xvi
Network and Security Manager (NSM) is a software application that centralizes control
and management of your Juniper Networks devices. With NSM, Juniper Networks delivers
integrated, policy-based security and network management for all security devices.
Unified Access Control (UAC) solution is an IP-based enterprise infrastructure that
coordinates network, application, and endpoint security compliance and provides the
control required to support network applications, manage network use, and reduce
threats.
This guide provides the information you need to understand, configure, and maintain an
Infranet Controller device using NSM. This guide explains how to use basic and advanced
NSM functionality, including adding new devices, deploying new device configurations,
updating device firmware, viewing log information, and monitoring the status of your
Infranet Controller device.
This guide is intended for the system administrator responsible for configuring the Infranet
Controller device.
Table 1 on page xiv defines notice icons used in this guide.
xiii