Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 154

NSM Infranet Controller Configuration Guide
136
Table 44: RADIUS Server Configuration Details (continued)
Option
Radius Settings > Backup Server tab
Backup Radius Server
Backup Authentication
Port
Backup Shared Secret
Backup Accounting Port
Radius Settings > Radius Accounting tab
User-Name
Interim Update Interval
(minutes)
Use NC assigned IP
Address for
FRAMED-IP-ADDRESS
attribute
Server Catalog > Expressions tab
Function
Specifies a secondary
RADIUS server for the
Infranet Controller to use
if the primary server (the
one defined in this
instance) is unreachable.
Specifies the
authentication port for the
backup RADIUS server.
Specifies the string for the
shared secret.
Specifies the accounting
port for the backup
RADIUS server.
Specifies the user
information that the
Infranet Controller should
send to the RADIUS
accounting server.
Specifies an interim update
interval that enables
precise billing for
long-lived session clients
and in case of a network
failure.
Specifies that the IP
address returned from the
Infranet Controller is used
for the framed-IP-address
attribute.
Your Action
Enter a secondary RADIUS server
name or IP address.
Enter the port value.
Enter a string for the shared secret.
Enter the port value.
Enter the user information.
The default variables for this field are:
<username>—Logs the user's
Infranet Controller username to the
accounting server.
<REALM>— Logs the user's Infranet
Controller realm to the accounting
server.
<ROLE>— Logs the user's Infranet
Controller role to the accounting
server. If the user is assigned to
more than one role, the Infranet
Controller comma separates them.
Enter the time.
Select the Use NC assigned IP
Address for FRAMED-IP-ADDRESS
attribute check box.
Copyright © 2010, Juniper Networks, Inc.