Delegating Management Tasks To Infranet Controller Administrator Roles; Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation
Delegating Management Tasks to Infranet Controller Administrator Roles (NSM

Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 9: Administrator Role Configuration Details (continued)
Option Function
Show Specifies the copyright notice
copyright and label in the footer.
notice in footer
Delegating Management Tasks to Infranet Controller Administrator Roles (NSM
Procedure) on page 55
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Configuring Access Options on an Infranet Controller User Role (NSM Procedure) on
page 40
Configuring OAC Settings for a User Role (NSM Procedure) on page 42
You can delegate management tasks to various delegated administrator roles.
To delegate management tasks to administrator roles:
In the navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure administrator role.
Click the Configuration tab. In the configuration tree, select Administrators > Admin
3.
Roles.
Add or modify settings under Admin Role as specified in Table 10 on page 55.
4.
Click one:
5.
OK — Saves the changes.
Cancel — Cancels the modifications.
Table 10: Administrator Role Configuration for Delegation
Option Function
Users > Roles > Delegate User Roles
Administrators Specifies whether the
can manage administrator can manage
ALL roles all roles
Chapter 6: Configuring User Roles and Administrator Roles
Your Action
Select or clear the check box (optional).
NOTE: If you do not want user roles to see the
copyright notice, you can also deselect the
option in the Default Settings for user roles, in
general. That way, all subsequent roles you
create do not allow the notice to appear on the
end-user UI.
Your Action
Select the user roles. If you only want to allow
the administrator role to manage selected user
roles, select those roles in the Non-members
list and click Add to move it to the Members
list.
55