Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 180

NSM Infranet Controller Configuration Guide
162
Table 51: Custom Rules Configuration Details (continued)
Rule
NHC Rule
Ports Rule
Process Rule
Usage Your Action
(Windows 1.
only)—Specifies the
location of a custom DLL.
Host Checker calls the
2. Select the Monitor this rule for
DLL to perform
customized client-side
checks. If the DLL returns
a success value to Host
Checker, then the Infranet
3. Click OK.
Controller considers the
rule met.
Controls the network 1.
connections that a client
2. Select the Required option to
can generate during a
session. This rule type
ensures that certain ports
are open or closed on the
3. Enter a comma delimited port list
client machine before the
user can access the
Infranet Controller.
4. Click OK.
Controls the software that 1.
a client may run during a
2. Select the Required option to
session. This rule type
ensures that certain
processes are running or
not running on the client
3. Enter the process name
machine before the user
can access resources
protected by the Infranet
4. Enter the MD5 checksums value of
Controller.
5. Select the Monitor this rule for
6. Click OK.
Enter the rule name, vendor name
and the path to NHC DLL on client
machines.
change in result check box to
continuously monitor the policy
compliance of endpoints.
Enter the rule name.
specify that these ports are open
or closed.
(without spaces) of ports or port
ranges, such as:
1234,11000-11999,1235.
Enter the rule name.
specify that these ports are open
or closed.
(executable file), such as:
good-app.exe.
each executable file to which you
want the policy to apply (optional).
change in result check box to
continuously monitor the policy
compliance of endpoints.
Copyright © 2010, Juniper Networks, Inc.