Configuring Infranet Controller System Options (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Infranet Controller System Options (NSM Procedure)

188
Click OK.
c.
Link the shared object to the corresponding node in the device configuration tree:
4.
In the Device Manager, double-click the Secure Access or Infranet Controller device
a.
to open the device editor, and then select the Configuration tab.
Navigate to the node in the configuration where you want to load the binary file.
b.
For example, to load an ESAP package, expand Authentication and then select
Endpoint Security. In the Host Checker tab, select Endpoint Security Assessment
Plug-Ins, and then click the Add icon.
Select the shared object. To continue the ESAP example, in the New Endpoint
c.
Security Assessment Plug-Ins dialog box, enter a version number, and select a
shared binary data object from the Path to Package list.
Click OK. If the object you want is not in the list, you can add it to the shared binary
d.
data list by clicking the Add icon. The Binary Data dialog box appears as in Step 3.
Click OK to save the newly configured links.
e.
Importing an Infranet Controller Device Through Not Reachable Workflow on page 11
Adding an Infranet Controller Cluster with Imported Cluster Members on page 24
You can configure the following Infranet Controller system options through NSM:
Version monitoring
GNU zip (gzip) compression
Kernel watchdog
File system auto-clean
Enable automatic upgrade
End-user localization
To configure the Infranet Controller system options:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure system options.
Click the Configuration tab. In the configuration tree, select System > Maintenance
3.
> System Maintenance Options.
Add or modify settings as specified in Table 55 on page 189.
4.
Click one:
5.
OK—Saves the changes.
Copyright © 2010, Juniper Networks, Inc.