Viewing Device Monitor Alarm Status - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Viewing Device Monitor Alarm Status

208
Table 58: Device Status Information (continued)
Column Description
H/W Inventory Displays the inventory status for hardware on the device:
Status
In Sync—The inventory information in the NSM database is synchronized
with the information on the device.
Out Of Sync—The inventory information in the NSM database is not
synchronized with the information on the device.
N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
S/W Inventory Displays the inventory status for software on the device:
Status
In Sync—The inventory information in the NSM database is synchronized
with the software on the device.
Out Of Sync—The inventory information in the NSM database is not
synchronized with the software on the device.
N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
License Inventory Displays the inventory status for software on the device:
Status
In Sync—The inventory information in the NSM database is synchronized
with the licenses on the device.
Out Of Sync—The inventory information in the NSM database is not
synchronized with the licenses on the device.
N/A—The connected device is a ScreenOS or IDP device, or the device is
not connected and imported.
First Connect The first time the security device connected to the NSM device server.
Latest Connect The last time the security device connected to the NSM device server.
Latest Disconnect The last time the security device disconnected from the NSM device server.
Viewing Device Monitor Alarm Status on page 208
Realtime Monitor Overview on page 205
Alarms refresh automatically through periodic polling.
To view the Alarm status and time:
From Device Monitor, right-click the device row entry and select the View Alarm option.
1.
The device Alarm Status dialog box displays the alarm list and polling time for the
device.
Retrieve the current alarm status in the device by clicking the Refresh button.
2.
Copyright © 2010, Juniper Networks, Inc.