Configuring Infranet Controller Browser Access Restrictions; Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Configuring Infranet Controller Browser Access Restrictions (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring Infranet Controller Host Checker Access Restrictions (NSM Procedure) on
page 67
Configuring the Number of Concurrent Sessions and Concurrent Users for Infranet
Controller Users (NSM Procedure) on page 70
Configuring Infranet Controller User Roles (NSM Procedure) on page 35
Browser restrictions control from which Web browsers users can access an Infranet
Controller sign-in page or be mapped to a role. If a user tries to sign into the Infranet
Controller using an unsupported browser, the sign-in attempt fails and a message displays
stating that an unsupported browser is being used. This feature also ensures that users
sign into the Infranet Controller from browsers that are compatible with corporate
applications or are approved by corporate security policies.
To configure Infranet Controller browser access restrictions:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure browser access restrictions.
Click the Configuration tab. In the configuration tree, select the level at which you
3.
want to implement browser access restrictions:
Realm level—Select:
Administrators > Admin Realms >Select Realm > Authentication Policies >
Browser to configure browser access restrictions for admin realms.
Users > User Realms > Select Realm > Authentication Policies > Browser to
configure browser access restrictions for user realms.
Role level—Select:
Administrators > Admin Roles > Select Role > General > Restrictions > Browser
Restrictions to configure browser access restrictions for admin roles.
Users > User Roles > Select Role > General > Restrictions > Browser Restrictions
to configure browser access restrictions for user roles.
Add or modify settings as specified in Table 12 on page 64.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Chapter 7: Configuring Security Requirements for Administrators and Users
63