Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 237

Copyright © 2010, Juniper Networks, Inc.
Table 63: Log Filter Configuration Details (continued)
Option
Start Date
End Date
Query
Format Type
Chapter 21: Configuring Logs in an Infranet Controller
Function
Specifies the date from
which logs have to be
written.
Specifies the date up to
which logs have to be
written.
Specifies the custom
expression language to
control which subset of
data the Infranet Controller
writes to the log.
Specifies the format of the
data in the log.
Your Action
Enter a start date.
Enter an end date.
To use the Infranet Controller custom
expression language:
1. Click the New Expression button.
The Custom Expression editor is
displayed.
2. Select the variable from the
Expression Dictionary and click the
Insert Expression button.
3. Click the Validate button to
validate the expression.
4. Click OK to save the custom
expression.
Select one of the following format
types:
Standard: This log filter format logs
the date, time, node, source IP
address, user, realm, and the
Infranet Controller event ID and
message.
WELF: This customized WebTrends
Enhanced Log Format (WELF) filter
combines the standard WELF
format with information about the
Infranet Controller appliance's
realms, roles, and messages.
W3C: The World Wide Web
Consortium's extended log file
format is a customizable ASCII
format with a variety of different
fields. Visit http://www.w3.org
for more information about this
format. Only the User Access log
offers this filter as an option.
Custom: Enter the format you want
to use in Custom Format. When
entering a format, surround
variables with percentage symbols
(for example %user%). All other
characters in the field are treated
as literals.
219