Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 140
Configuring infranet controllers guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01:
- Manual (444 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
NSM Infranet Controller Configuration Guide
122
Table 39: Active Directory or NT Domain Instance Configuration
Details (continued)
Option
Primary Domain Controller
or Active Directory
Secondary Domain
Controller or Active
Directory
Domain
Allow domain to be
specified as part of
username
Allow trusted domains
Admin Username
Admin Password
Kerberos (most secure)
NTLMV2 (moderately
secure)
NTLMV1 (least secure)
Function
Your Action
Specifies the name or IP
Enter the name or IP address.
address for the primary
domain controller or Active
Directory server.
Specifies the name or IP
Enter the name or IP address.
address for the backup
domain controller or Active
Directory server.
Specifies the domain
Enter the domain name of the Active
name of the Active
Directory or Windows NT domain.
Directory or Windows NT
NOTE: For example, if the Active
server.
Directory domain name is
us.amr.asgqa.net and you want to
authenticate users who belong to the
US domain, enter US as the domain.
Allows users to sign in by
Select AD/NT Settings > General >
entering a domain name in
Allow domain to be specified as part
the Username box in the
of username to enable this feature.
format:
"domain\username."
Allows users to get group
Select AD/NT Settings > General
information from all
>Allow trusted domains to enable this
trusted domains within a
feature.
forest.
Specifies an administrator
Enter an administrator username for
username for the Active
the Active Directory or NT server.
Directory or NT server.
Specifies an administrator
Enter an administrator password for
password for the Active
the Active Directory or NT server.
Directory or NT server.
Allows the Infranet
Select AD/NT Settings > General
Controller to send user
>Kerberos (most secure) to enable
credentials to Kerberos.
this feature.
Allows the Infranet
Select AD/NT Settings > General
Controller to send user
>NTLMV2 (moderately secure) to
credentials to NTLMv2.
enable this feature.
Allows the Infranet
Select AD/NT Settings > General
Controller to send user
>NTLMV1 (least secure) to enable this
credentials to NTLMv1.
feature.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 and is the answer not in the manual?