Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 170

NSM Infranet Controller Configuration Guide
152
Table 48: User Sign–in Policies Configuration Details
Option
Sign-in URL
Description
Enable
Sign-in Page
User Type
authentication-realms
User may specify the
realm name as a
username suffix
Remove realm suffix
before passing to
authentication server
Function
Specifies the URL that you
want to associate with the
policy.
Describes the user sign-in
policies.
Enables the sign-in policy
option.
Specifies the page that you
want to associate with the
sign–in policy.
Specifies the user type.
Specifies the realm(s) that
should be mapped to the
sign-in policy.
Allows non-UAC endpoints
to access the Infranet
Controller by entering their
credentials in the format
user@realm.
Allows users who enter
their credentials with a
suffix to send the user
name without the suffix.
Most authentication
servers are not compatible
with a realm suffix or
decorated username.
Your Action
Enter the URL.Use the format
<host>/<path>, where <host> is the
hostname of the Infranet Controller
and <path> is any string you want
users to enter. For example, enter:
users1.yourcompany.com/ic.
To specify multiple hosts, use the *
wildcard character. To specify that all
end–user URLs should use the sign-in
page, enter */.
Enter a brief description for the user
sign-in policies.
Select this option.
Select the default page that comes
with the Infranet Controller, a variation
of the standard sign-in page, or a
custom page that you create using the
customizable UI feature. For more
information, see "Configuring Standard
Sign-In Pages."
Select User.
1. Click authentication-realms. The
Authentication dialog box appears.
2. Select the Realm and
Authentication Protocol.
3. Click OK.
Select this option.
Select this option.
Copyright © 2010, Juniper Networks, Inc.