Configuring User Access Logs (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Related
Documentation

Configuring User Access Logs (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Table 59: Event Logs Configuration Details (continued)
Option
Enforcer Events
Enforcer Command Trace
Syslog Servers
Server name/IP
Facility
Filter
Configuring Client-Side Logs (NSM Procedure) on page 216
Configuring User Access Logs (NSM Procedure) on page 213
Configuring Administrator Access Logs (NSM Procedure) on page 214
Configuring the Infranet Controller as an SNMP Agent (NSM Procedure) on page 216
The user access log file contains information about when users access the appliance,
including the number of simultaneous users at each one-hour interval (logged on the
hour) and user sign-ins and sign-outs.
To configure user access logs:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure user access logs.
Click the Configuration tab. In the configuration tree, select System > Log/Monitoring
3.
> User Access.
Add or modify settings as specified in Table 60 on page 214.
4.
Click one:
5.
Chapter 21: Configuring Logs in an Infranet Controller
Function
Logs the enforcer events.
Logs the enforcer
command trace events.
Specifies the name or IP
address of the syslog
server.
Specifies the facility for the
server. The Infranet
Controller provides eight
facilities
(LOCAL0-LOCAL7) that
you can map to facilities on
your syslog server.
Specifies the filter that you
want to apply to the log
file.
Your Action
Select this option to log enforcer
event details.
Select this option to log enforcer
command trace events.
Enter the server name or the IP
address.
Select the facility.
Select the filter to be applied to the
log file.
213