Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 168

NSM Infranet Controller Configuration Guide
150
Table 47: Administrator Sign–in Policies Configuration Details
Option
Sign-in URL
Description
Enable
Sign-in Page
User Type
Function
Specifies the URL that you
want to associate with the
policy.
Specifies the description
for the policy.
Enables the sign-in policy
option.
Specifies the page that you
want to associate with the
sign-in policy.
Specifies the user type.
Your Action
Enter the URL. Use the format
<host>/<path>, where <host> is the
hostname of the Infranet Controller
and <path> is any string you want
users to enter. For example, enter:
users1.yourcompany.com/ic.
To specify multiple hosts, use the *
wildcard character. To specify that all
administrator URLs should use the
sign-in page, enter */admin.
NOTE: You may only use wildcard
characters (*) in the beginning of the
hostname portion of the URL. The
Infranet Controller does not recognize
wildcards in the URL path.
Enter a brief description for the
administrator sign-in policy.
Select this option.
Select the sign-in page.
Select Administrator, and click Add
to move the required Admin Realms
from the Non-members list to the
Members list.
Copyright © 2010, Juniper Networks, Inc.