Configuring And Enabling The Dmi Agent On The Cluster; Importing Cluster Configuration - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Configuring infranet controllers guide
Hide thumbs Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01:
Table of Contents

Advertisement

Configuring and Enabling the DMI Agent on the Cluster

Importing Cluster Configuration

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Enter a new name for the Infranet Controller device in Device Name to change the
8.
host name of the Infranet Controller device. An error message is displayed if the device
name is not unique.
Click Finish to add the cluster member to the NSM GUI. The cluster member as a child
9.
of the Infranet Controller cluster in the Devices workspace.
On each cluster member device, configure and activate the DMI agent and establish an
SSH session with NSM.
After adding the cluster members, you must import the cluster configurations. You do
this only once and for the entire cluster because the configuration is identical for all cluster
members.
To import the cluster configuration:
From the left pane of the NSM UI, click Configure.
1.
Expand Device Manager and select Devices. The Devices workspace appears on the
2.
right side of the screen.
Click the Device Tree tab. Right-click the cluster to which you want to import the
3.
configurations, and select Import Device.
NSM starts to import the configuration and a job window reports the progress of the job.
When the job finishes, the configuration status for each cluster member in the Device
List tab changes from Import Needed to Managed.
After importing, the configuration appears at the cluster level in NSM. To edit the
configuration, open the cluster icon, not the individual cluster members.
Importing an Infranet Controller Device Through Not Reachable Workflow on page 11
Importing an Infranet Controller Through Reachable Workflow on page 15
Creating and Applying an Infranet Controller Template on page 29
Verifying Imported Device Configurations on page 19
Infranet Controllers Clusters in NSM Overview on page 23
Chapter 4: Adding Infranet Controller Clusters
27

Advertisement

Table of Contents
loading

Table of Contents