Configuring Sign-In Policies; Configuring Infranet Controller Sign-In Policies (Nsm Procedure); Configuring Administrator Sign-In Policies - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 14

Configuring Sign-In Policies

Configuring Infranet Controller Sign-in Policies (NSM Procedure)

Configuring Administrator Sign-In Policies

Copyright © 2010, Juniper Networks, Inc.
Configuring Infranet Controller Sign-in Policies (NSM Procedure) on page 149
Configuring Infranet Controller Standard Sign-in Pages (NSM Procedure) on page 153
Sign-in policies define the URLs that users and administrators use to access the Infranet
Controller and the sign-in pages that they see. The Infranet Controller has two types of
sign-in policies—one for administrators and one for users. When configuring sign-in
policies, you associate realms, sign-in pages, and URLs.
This topic contains the following information about sign-in policies:
Configuring Administrator Sign-In Policies on page 149
Configuring User Sign-in Policies on page 151
To define an administrator sign-in policies:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to define the administrator sign-in policies.
Click the Configuration tab. In the configuration tree, select Authentication > Signing
3.
In > Sign-in Policies > User/Administrator URLs.
Add or modify the settings for the User/Administrator URLs as specified in Table 47
4.
on page 150.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
149