Configuring Event Logs (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Event Logs (NSM Procedure)

212
Cancel—Cancels the modifications.
Configuring RADIUS Return Attributes Policies (NSM Procedure) on page 80
Configuring RADIUS Request Attributes Policies (NSM Procedure) on page 83
The events log file contains a variety of system events, such as session timeouts (including
idle and maximum length session timeouts), system errors and warnings, requests to
check server connectivity, and Infranet Controller service restart notifications.
To configure event logs:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure event logs.
Click the Configuration tab. In the configuration tree, select System > Log/Monitoring
3.
> Events.
Add or modify settings as specified in Table 59 on page 212.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 59: Event Logs Configuration Details
Option
Settings
Max Log Size
Connection Requests
System Status
System Errors
Statistics
Performance
Function
Specifies the maximum file
size for the local log file.
The limit is 500 MB.
Logs the connection
requests.
Logs the system status.
Logs the system errors.
Logs the statistical
information.
Logs the performance
information.
Your Action
Enter the maximum log file size.
Select this option to log connection
requests.
Select this option to log system status
information.
Select this option to log system error
details.
Select this option to log statistical
details.
Select this option to log performance
details.
Copyright © 2010, Juniper Networks, Inc.