Creating And Configuring Infranet Controller Administrator Roles; Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Creating and Configuring Infranet Controller Administrator Roles (NSM Procedure)
48
An administrator role defines administrator session and personalization settings. You
can create and configure an administrator role from the Infranet Controller configuration
tree.
To create an administrator role:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure administrator role.
Click the Configuration tab. In the configuration tree, select Administrators > Admin
3.
Roles.
Add or modify settings on the Admin Role tab as specified in Table 9 on page 48.
4.
Click one:
5.
OK — Saves the changes.
Cancel — Cancels the modifications.
NOTE: To create individual administrator accounts, you must add the users
through the appropriate authentication server (not the role). For example,
to create an individual administrator account, select Authentication > Auth.
Servers > Administrators > Users from the NSM UI.
Table 9: Administrator Role Configuration Details
Option Function
Admin Role > General tab
Name Specifies a unique name for
the administrator role.
Admin Role > General > Overview tab
Description Describes the administrator
role.
Session Specifies the maximum
Options session length, roaming
capabilities, and session
persistence.
UI Options Specifies the logo, color,
navigation menus and the
copyright notice.
Your Action
Enter a name.
Enter a brief description for the administrator
role.
Select General > Session Options to apply the
settings to the role.
Select General > UI Options to apply the
settings to the role.
Copyright © 2010, Juniper Networks, Inc.