Importing Multiple Infranet Controllers; Creating The Csv File - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Importing Multiple Infranet Controllers

Creating the CSV File

16
the hostname configured on the device. You can either use the hostname as the NSM
device name or you can enter a new name in the text box provided.
Click Next after verifying the auto detected device information.
9.
Click Finish to add the device to the NSM UI. The Infranet Controller appears in the
10.
Devices workspace.
Importing an Infranet Controller Device Through Not Reachable Workflow on page 11
Requirements for Importing an Infranet Controller into NSM Through a Reachable
Workflow on page 15
Verifying Imported Device Configurations on page 19
If your network includes a large number of devices, you can save time by adding multiple
devices in a single workflow. You can add up to 4000 devices at a time to a single domain
(but you cannot add multiple devices to different domains at one time).
Add multiple Infranet Controllers by following these procedures:
Creating the CSV File on page 16
1.
Validating the CSV File on page 18
2.
3. Adding and Importing Multiple Infranet Controllers on page 18
The CSV file defines all the required and optional values for each Infranet Controller
device. Within a .csv file, you define the Infranet Controller configuration values that you
want to add. The required and optional values depend not only on how the Infranet
Controllers are deployed on your network but also on the device family.
Juniper Networks provides CSV templates in Microsoft Excel format for each type of CSV
file. These templates are located in the utils subdirectory where you have stored the
program files for the UI client. For example:
C:\Program Files\Network and Security Manager\utils
For each CSV file, each row defines a single Infranet Controller's values for each parameter.
For text files, columns are separated by commas.
Creating Infranet Controller Parameters in CSV File
For an Infranet Controller, Table 5 on page 16 lists the parameters to be set in the CSV
file.
Table 5: CSV File Information for Infranet Controllers
Field
Name
Type Required
String yes
Acceptable Values
ic-6500, ic-4500
Copyright © 2010, Juniper Networks, Inc.