Requirements For Importing An Infranet Controller Into Nsm Through A Reachable; Workflow; Importing An Infranet Controller Through Reachable Workflow - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Requirements for Importing an Infranet Controller into NSM Through a Reachable

Workflow

Related
Documentation

Importing an Infranet Controller Through Reachable Workflow

Copyright © 2010, Juniper Networks, Inc.
Adhere to the requirements to import an Infranet Controller into NSM through a reachable
workflow:
The inbound DMI connection must be enabled in the Infranet Controller.
The SSH port must be configured in the Infranet Controller. The default SSH port is
22.
The DMI agent admin realms must be configured and an admin user must be mapped
to a role with full admin privileges.
Importing an Infranet Controller Through Reachable Workflow on page 15
Importing an Infranet Controller Device Through Not Reachable Workflow on page 11
Verifying Imported Device Configurations on page 19
To import an Infranet Controller through a reachable workflow into NSM:
From the left pane of the NSM UI, click Configure.
1.
Expand Device Manager and select Devices. The Devices workspace appears on the
2.
right side of the screen.
Click the Device Tree tab, click the New button, and select Device. The New Device
3.
dialog box appears.
Select Device is Reachable and click Next.
4.
Enter the following connection information:
5.
Enter the IP address of the device.
Enter the username of the device administrator.
Enter the password for the device administrator.
Select SSH V2 as the connection method.
Ensure that the TCP port number is 22 .
Click Next. The Verify Device Authenticity dialog box appears. The Add Device wizard
6.
displays the RSA Key FingerPrint information. To prevent man-in-the-middle attacks,
you should verify the fingerprint using an out-of-band method.
Click Next to accept the fingerprint. The Detecting Device dialog box opens.
7.
After the wizard displays the autodetected device information, verify that the device
8.
type, OS version, and the device serial number are correct. The wizard also detects
Chapter 3: Adding Infranet Controllers
15