Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 138

NSM Infranet Controller Configuration Guide
120
To configure an ACE/Server instance:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure an ACE server instance.
Click the Configuration tab. In the configuration tree, select Authentication > Auth
3.
Servers.
Add or modify ACE/Server settings as specified in Table 38 on page 120.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 38: ACE Server Instance Configuration Details
Option
Auth Server Name
Auth Server Type
ACE Settings
ACE Port
Config File Name
Imported on
Import Config File
Users authenticate using
tokens or one-time
passwords
Server Catalog > Expressions tab
name
Function
Specifies a name for the
auth server.
Specifies the auth server
type.
Specifies the default port
of the ACE/Server.
Specifies the RSA
ACE/agent configuration
file.
Specifies the date on which
the config file is imported.
Specifies the configuration
file for importing.
Prompts the user for a
token instead of a
password.
Specifies a name for the
user expression in the
ACE/Server user directory.
Your Action
Enter a name for the auth server.
Select ACE Server.
Enter a default port number.
NOTE: If no port is specified in the
sdconf.rec file, then the Infranet
Controller uses this setting.
Enter the config file name.
NOTE: You must update this file on
the device anytime you make changes
to the source file.
For information only. View the date
on which the config file was imported.
Select the configuration file to be
imported by using the browse button.
Select this option if users submit
tokens or one-time passwords to the
Infranet Controller.
Enter a name for the user expression.
Copyright © 2010, Juniper Networks, Inc.