Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 233

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
To configure administrator access logs:
In the NSM navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure administrator access logs.
Click the Configuration tab. In the configuration tree, select System > Log/Monitoring
3.
> Admin Access.
Add or modify settings as specified in Table 61 on page 215.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 61: Administrator Access Logs Configuration Details
Option
Settings
Max Log Size
Administrator Changes
Administrator Logins
License Changes
Syslog Servers
Server name/IP
Facility
Filter
Configuring Client-Side Logs (NSM Procedure) on page 216
Chapter 21: Configuring Logs in an Infranet Controller
Function Your Action
Specifies the maximum Enter the maximum log file size.
file size for the local log
file. The limit is 500 MB.
Logs the administrator Select this option to log administrator
changes. changes.
Logs the administrator Select this option to log administrator
login information. login information.
Logs the license change Select this option to log license
information. change information.
Specifies the name or IP Enter the server name of the IP
address of the syslog address.
server.
Specifies the facility for Select the facility.
the server. The Infranet
Controller provides eight
facilities
(LOCAL0-LOCAL7) that
you can map to facilities
on your syslog server.
Specifies the filter that you Select the filter.
want to apply to the log
file.
215