Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 150

NSM Infranet Controller Configuration Guide
132
Table 42: Local Authentication Server Instance Configuration
Details (continued)
Option Function
Force user to change Specifies the days after which the
password (days) user would be forced to change the
password.
Prompt user to Specifies the number of days after
change password which users are prompted to change
(days) their password.
Password stored as Enables CHAP and
clear text EAP-MD5-Challenge to work with
local auth servers.
Users
Username Specifies the username.
Full name Specifies the user's full name.
Password Specifies the password.
One-time user Specifies that the user is limited to
one login.
Enabled Allows the administrator to
selectively enable or disable any
user (one time or permanent).
Require user to Specifies that users must change
change password at their password at the next login.
next sign in
Admin Users
You can create user administrators to give individuals with user-level
permissions some administrative capabilities on the Infranet Controller.
A user administrator can add new users, change passwords, delete
existing users, specify an expiration time, and specify one-time privileges
for guest accounts.
NOTE: User administrators can only administer local authentication
servers.
Username Specifies the username of the user
who you want to manage accounts
for the selected authentication
server. This user does not need to
be added as a local user on the
server.
Your Action
Enter the number of days after
which the password expires.
Enter the number of days after
which users are prompted to
change their password.
Select the check box.
NOTE: Be aware of the security
implications of storing passwords
as clear text.
Enter the username.
Enter the user's full name.
Enter the password.
Select Users > One-time user to
enable this option.
Select Users > Enabled to enable
this option.
Select Users > Require users to
change password at next sign in
to enable this option.
Enter the username.
Copyright © 2010, Juniper Networks, Inc.