Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 158

NSM Infranet Controller Configuration Guide
140
Table 45: Infranet Controller eTrust SiteMinder Configuration
Details (continued)
Option
Siteminder Settings > Authentication tab
Automatic Sign-In
Automatic Sign In realm to
use
If Automatic Sign In fails,
redirect to
Authentication Type >
Custom Agent
Authentication Type >
Form POST
Function Your Action
Specifies that users with a Select the Automatic Sign-In check
valid SMSESSION box to enable this feature.
automatically sign in to
the Infranet Controller.
Specifies an Select an authentication realm from
authentication realm for the drop-down list.
automatically signed-in
users. The Infranet
Controller maps the user
to a role based on the role
mapping rules defined in
the selected realm.
Specifies an alternate URL Enter a URL.
for users who sign into the
Infranet Controller through
the Automatic Sign-In
mechanism. The Infranet
Controller redirects users
to the specified URL if the
Infranet Controller fails to
authenticate and no
redirect response is
received from the
SiteMinder policy server. If
you leave this box empty,
users are prompted to sign
back in to the Infranet
Controller.
NOTE:
Users who sign in
through the sign-in page
are always redirected
back to the Infranet
Controller sign-in page
if authentication fails.
Specifies that Select Siteminder Settings >
authentication can be Authentication > Authentication
done using the Infranet Type > Custom Agent.
Controller custom Web
agent.
Specifies to post user Select Siteminder Settings >
credentials to a standard Authentication > Authentication
Web agent that you have Type > Form POST to contact the
already configured rather policy server to determine the
than contacting the appropriate sign-in page to display to
SiteMinder policy server the user.
directly.
Copyright © 2010, Juniper Networks, Inc.