Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 162
Configuring infranet controllers guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01:
- Manual (444 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
NSM Infranet Controller Configuration Guide
144
Table 45: Infranet Controller eTrust SiteMinder Configuration
Details (continued)
Option
Enable Session Grace
Period
Validate cookie every
(seconds)
Ignore Query Data
Function
Your Action
Specifies that users can
Select Siteminder Settings >
eliminate the overhead of
Advanced > Enable Session Grace
verifying a user's
Period to enable this feature.
SMSESSION cookie each
You can eliminate the overhead of
time the user requests the
verifying a user's SMSESSION cookie
same resource by
each time the user requests the same
indicating that the Infranet
resource by indicating that the Infranet
Controller should consider
Controller should consider the cookie
the cookie valid for a
valid for a certain period of time.
certain period of time.
During that period, the Infranet
If you do not select this
Controller assumes that its cached
option, the Infranet
cookie is valid rather than revalidating
Controller checks the
it against the policy server. Note that
user's SMSESSION cookie
the value entered here does not affect
on each request.
session or idle timeout checking.
Specifies the time period
Enter the time period in seconds.
for the Infranet Controller
to eliminate the overhead
of verifying a user's
SMSESSION cookie each
time the user requests the
same resource by
indicating that the Infranet
Controller should consider
the cookie valid for a
certain period of time.
Specifies the query
Select the Ignore Query Data option
parameter in the URL as
to enable this feature.
specified in the cached
URL.
The Infranet Controller
does not cache the query
parameter in its URLs.
Therefore, if a user
requests the same
resource as is specified in
the cached URL, the
request should not fail. For
example, if you enable the
Ignore Query Data option,
both of the following URLs
are considered the same
resource:
http:/ /foo/bar?param=value1
http:/ /foo/bar?param=value2
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01
Related Products for Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3
- Juniper NETWORK AND SECURITY MANAGER 2010.2
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV 1
- Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.5
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 and is the answer not in the manual?