Manager - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation
Associating Enforcement Points with an Infranet Controller Using the UAC Manager
182
you can view the associated Infranet Controller and its location group information. From
the Port details tab, you can see the 802.1X enabled port names and their details.
Associating Enforcement Points with an Infranet Controller Using the UAC Manager
on page 182
Enabling Dot1x Ports on the Enforcement Points Using the UAC Manager on page 184
Disassociating the Configuration Between an Enforcement Point and an Infranet
Controller on page 183
Disabling the Dot1x Ports on an Enforcement Point Using the UAC Manager on page 185
NOTE:
Before you begin associating enforcement points with an Infranet Controller,
ensure the following:
The administrator must have proper privileges for associating enforcement
points with an Infranet Controller in the current domain.
The Infranet Controller and the enforcement points should be managed
by NSM in the current domain.
The connection status of the devices to be associated should be "up" in
NSM.
To associate enforcement points with an Infranet Controller:
In the NSM navigation tree, select UAC Manager > Infranet Controller. The Infranet
1.
Controller workspace appears.
Select the stand-alone Infranet Controller or the Infranet Controller cluster to which
2.
you need to associate enforcement points.
NOTE: The Infranet Controller is deployed either as a standalone device
or as a cluster (active-active cluster mode or active-passive cluster mode).
Click the Add Enforcement Point button. The Select Enforcement Points dialog box
3.
appears with the list of enforcement points managed by NSM but not yet associated
with the Ex-series switch.
If the Infranet Controller is deployed as a active-active cluster, select the cluster
4.
member.
Select the Ex-series switch to which the association has to be made, and move it to
5.
the Selected Enforcement Points list.
Enter the RADIUS secret shared between the Infranet Controller and enforcement
6.
points.
Copyright © 2010, Juniper Networks, Inc.