Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual page 35

Copyright © 2010, Juniper Networks, Inc.
Table 5: CSV File Information for Infranet Controllers (continued)
Field
Color
OS Name
Platform
Device Subtype
Managed OS Version
Device Admin Name
Device Admin Password
Using an Excel File to Add Multiple Infranet Controllers
To edit the Excel file to add multiple Infranet Controllers:
Copy and open either the
1.
bulkadd_nonreachable-DMI-sample.csv
Security Manager/utils .
Using one row for each Infranet Controller you want to add, enter the required values
2.
for each parameter that you wish to set for them. You can also provide optional values,
if desired.
Save the file to a location on your local drive.
3.
Using a Text File to Add Multiple Infranet Controllers
To add multiple Infranet Controllers using a text file, create a text file with the following
text:
Open a text file and add the Infranet Controllers and its parameters as follows:
1.
Ic-6000, blue, ic, IC-6000, none, root, 2.2, netscreen
Ic-6500, pink, ic, IC-6500, none, root, 2.2, netscreen
Ic-4000, cyan, ic, IC-4000, none, root, 2.2, netscreen
Ic-4500, pink, ic, IC-4500, none, root, 2.2, netscreen
Save the file as a .csv file.
2.
Type Required
String yes
String yes
String yes
String yes
String yes
String yes
String yes
bulkadd_nonreachable-sample.csv
file located in
Chapter 3: Adding Infranet Controllers
Acceptable Values
blue, red, green, yellow, cyan,
magenta, orange, pink.
IC
IC-4500, IC-6500
Set to "none"
2.2
<administrator>
<password>
Must be a minimum of nine
characters.
file or the
C:/Program Files/Network and
17