Adding The Cluster Members In Nsm - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

Adding the Cluster Members in NSM

Copyright © 2010, Juniper Networks, Inc.
Enter the cluster name and select the required color, OS name (IC), platform, and
4.
managed OS version from the drop-down lists.
Click OK. The new cluster appears in the Device Manager.
5.
You add cluster members one at a time in a similar manner to adding standalone devices.
Adding Cluster Members through Not Reachable Workflow
To add a cluster member through the non-reachable workflow:
From the left pane of the NSM UI, click Configure.
1.
Expand Device Manager and select Devices. The Devices workspace appears on the
2.
right side of the screen.
Click the Device Tree tab, and select the cluster to which you want to add the members.
3.
Click the New button and select Cluster Member. The New–Cluster Member dialog
4.
box appears.
Enter the cluster member name, select Device Is Not Reachable and click Next.
5.
From the Choose Device Server Connections Parameter area, select:
6.
Use Default Device Server IP Address and Port—Connects the device to the NSM
device server IP address and port.
Use Device Server Through MIP—Connects the NSM device server through a mapped
IP address and port.
Click Next, and a unique external ID gets generated automatically. This ID represents
7.
the device within the management system.
Enter a admin user name for the device admin.
8.
Set the admin user password and the first connection one-time password:
9.
Select the corresponding Set Password box and enter a new password.
a.
Confirm the new password and click OK.
b.
Chapter 4: Adding Infranet Controller Clusters
25