Violation Viewer; Modifying Profiler Settings (Nsm Procedure); Configuring Profiler Options (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01 Manual

Violation Viewer

Related
Documentation

Modifying Profiler Settings (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
The Violation Viewer is a filtered view of the Network Profiler view. In the Violation Viewer,
you configure permitted objects. Permitted objects are filtered from the display, allowing
you to focus on unpermitted traffic.
To configure permitted objects:
Navigate to Investigate > Security Monitor > Profiler.
1.
Click the Violation Viewer tab.
2.
Click on the + icon that appears on the top of the right-hand window to display the
3.
New Permitted Object dialog box.
Type a name for the permitted object.
4.
Within the New Permitted Object dialog box, click the + icon to add a rule to match
5.
source, destination, and services values for the permitted object.
To change the source, destination, or service value from Any, right-click the value and
6.
select Add Source, Add Destination, or Add Service.
Use the selection controls to select the desired address objects or service objects and
7.
click OK.
Click OK to save the permitted object.
8.
The object appears in the filters windows within the Violation Viewer tab.
Select the object and click Apply to hide all matching objects from the Violation
9.
Viewer.
TIP: For information about using additional NSM features to sort, filter, and
drill down on records, see the NSM online Help.
Configuring Profiler Options (NSM Procedure) on page 13
Displaying Profiler Database Information (NSM Procedure) on page 28
Querying the Profiler Database (NSM Procedure) on page 28
You can use the Profiler Settings dialog box to modify Profiler database settings and
default settings for application volume tracking reports.
To modify profiler database and application volume tracking settings:
From the NSM main menu, select Tools > Preferences. The New Preferences dialog
1.
box is displayed.
Click Profiler Settings.
2.
Chapter 3: Configuring Profiler Settings
25