Juniper JUNOS OS 10.3 - SOFTWARE Manual page 176

Complete Software Guide for Junos
80
®
OS for EX Series Ethernet Switches, Release 10.3
Log in to the master Routing Engine's console.
1.
For information on logging in to the Routing Engine through the console port, see
"Connecting and Configuring an EX Series Switch (CLI Procedure)" on page 187.
Enter the Junos OS CLI configuration mode:
2.
a. Start the CLI from the shell prompt:
user@switch:RE% cli
You will see:
{master}
user@switch>
b. Enter configuration mode:
user@switch> configure
You will see:
{master}[[edit]
user@switch#
Disable GRES (graceful Routing Engine switchover):
3.
[edit]
user@switch# deactivate chassis redundancy graceful-switchover
Save the configuration change on both Routing Engines:
4.
[edit]
user@switch# commit synchronize
NOTE: To ensure the most recent configuration changes are committed
before the software upgrade, perform this step even if GRES was previously
disabled.
Exit out of the CLI configuration mode:
5.
[edit]
user@switch# exit
(Optional) Back up the current software configuration to a second storage option.
6.
See the Junos OS Installation and Upgrade Guide at
http://www.juniper.net/techpubs/software/junos/index.html
performing this task.
for instructions on
Copyright © 2010, Juniper Networks, Inc.