Request System Software Add - Juniper JUNOS OS 10.3 - SOFTWARE Manual

request system software add

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
request system software add package-name
<best-effort-load>
<delay-restart>
<force>
<no-copy>
<no-validate>
<re0 | re1>
<reboot>
<unlink>
<validate>
request system software add package-name
<best-effort-load>
<delay-restart>
<force>
<lcc number | scc>
<no-copy>
<no-validate>
<re0 | re1>
<reboot>
<unlink>
<validate>
request system software add package-name
<best-effort-load>
<delay-restart>
<force>
<lcc number | sfc number>
<no-copy>
<no-validate>
<re0 | re1>
<reboot>
<unlink>
<validate>
Command introduced before Junos OS Release 7.4.
best-effort-load and unlink
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Install a software package or bundle on the router or switch.
package-name —Location from which the software package or bundle is to be installed.
For example:
/var/tmp/package-name
from a local directory on the router or switch.
protocol://hostname/pathname/package-name
that is to be downloaded and installed from a remote location. Replace
with one of the following:
Chapter 10: Operational Mode Commands for Software Installation
options added in Junos OS Release 7.4.
—For a software package or bundle that is being installed
—For a software package or bundle
protocol
117